Jinshan Carnival Rides and Playground Equipment

News / Jinshan Blog

Emergency Response Measures for Sightseeing Trains

  1. The motor stops running

  If the motor suddenly stops running, it will affect the continued operation of the train. Please park the vehicle in a safe place as soon as possible and check the circuit system and battery power of the vehicle at this time. If the circuit is faulty, contact the manufacturer or find a professional to check and repair it.  If the power is insufficient, charge it.

  1. The tire leaks

 If the tire is found to be leaking, first observe the following precautions to ensure the safety of the passengers before replacing the tires. Park the vehicle on a roadside or in a flat place and turn on the emergency light, and inform the passengers of the reason, or send another train to pull the passengers to ensure that the passenger’s tour time is not affected.

 After the train stops, pull the handbrake in time. In order to prevent the vehicle from slipping when it is jacked up, it is necessary to block the wheels of the wheel to be replaced by the skid.

 Remove the spare tire, jack and wheel nut wrench. Place the spare wheel on the underside of the body close to the jack so that the danger can be avoided when the jack slides out of its position.

 After replacing the tires, slowly lower the jacks and then alternately tighten the nuts until they are tightened to the specified torque. Tightening torque: 320N – 350N.

Prev:
Next: