Jinshan Carnival Rides and Playground Equipment

News / Jinshan Blog

Instruction Manual of UFO Bumper Car

The round bumper cars produced by our company are characterized by light weight, flexibility, high safety and good operability. The specific instructions are as follows:

  1. Disconnect the main power switch under the car and push it to the side without the trademark. The battery can be loaded from the bottom of the car and battery screws should be fixed to ensure the battery is strong and not easy to fall off.
  2. Connect the positive (red) and negative (blue or black) of the power supply on the body to the positive and negative terminals of the battery. After tihtening, turn on the main power switch. (At this time, the music horn emits a sound and the system will automatically detect if it is working properly)
  3. The car is equipped with a plug (key or remote control), the key is inserted into the rear start jack and then pull out or press the remote control of the corresponding button on the car. At this time, music songs are sung, and the passengers on the car can control both sides. The handle can be operated. That is, when the two handles are pushed forward at the same time, the car goes straight ahead, otherwise the car goes straight backwards, and if one handle pushes forward and the other handle pushes backward, the car rotates in its position. If necessary, the rear light of the car body can be turned on, and the light on the car will be shining (suitable for evening use)