Jinshan Carnival Rides and Playground Equipment

News / Jinshan Blog

Instruction of Battery Bumper Car

Introduction:

The battery bumper car is an improved product of traditional land bumper car. It does not need the ground net and the sky net. It can be driven on ordinary ground, such as ordinary floor tiles.It is a very popular entertainment device. Visitors drive personally, left and right, move forward and backward, greatly enhancing the interaction of tourists. The outer shell of the product is made of FRP material, and the protective layer is made of colored gel coat, which has high strength, acid and alkali resistance, and no faded. The outer ring buffer is made of bumper tires, which have a long service life and no deformation in the sun. The entire vehicle is powered by a battery.

Features:

  1. Integrated seamless FRP body, combined with unique shape design, more visual impact.
  2. Steering using steering wheel, using motor vehicle steering gear, performance is more reliable, and control is more flexible.
  3. The soft backrest design and the driving seat design make the ride more comfortable.
  4. Front and rear lamp system, the vision is more beautiful, bringing a touch of scenery to the beautiful night.

5.Using super wear-resistant polyester rubber wheel, the longest can guarantee the life of the wheel without replacement, significantly reducing the cost of use.

Technical Parameters

Power supply mode; 24V battery pack (Note: 12V batteries /2 pcs)

Motor power: 180W

Running speed; 1.5–1.9/s

Drive mode; front drive / 360 degree direction control (chain / gear)

Material; steel structure and RFP

Dimensions; 1.9*1.1*1m

Capacity: 2 people/set

Packing: bubble film packaging / can be made of steel frame (other calculation)

Charger: 24V, 10A ( It is recommended that the charging current be controlled below 10A)

Site requirements:

There is no need to fix the site, the ground level with protection can be used.

Electrical safety

  1. Regularly check the battery to see if it is leaking. If there are any problems, replace it in time.
  2. The bumper car is equipped with remote control switch for normal operation. In case of emergency, the pedal of the car body (lower right corner), the main switch of the power supply can be cut off in time.

USE Instruction

  1. Attention

(1) Operation and maintenance of this product require certain mechanical and electrical knowledge.

(2) it is strictly prohibited to use battery bumper cars in the open rain or use the water on the ground.

(3) the newly purchased battery bumper cars should be maintained within half a month. (maintenance contents: check the screws, check whether the thread is loose, and whether the oil parts are short of oil and so on).

  1. USE overview

(1) First step: equipment integrity check

Open the package to ensure that the appearance and components of the device are damaged, and the connection lines are complete.

  • Step 2: Battery installation

 Remove the equipment seat plate and put the battery in good condition. The example is 24V battery group (two series of 12V batteries are connected in series). Note that the red line is connected to the positive pole, the black line (or green line) is connected to the negative pole, and the middle positive pole and the negative pole are connected by the connecting line. Protect the battery filling hole to prevent the battery liquid burned the circuit board or other components. The battery connecting wire must be tightened to prevent the virtual connection from burning and burning the device.

Connect Red Line( Positive pole)      Connect Black Line(Negative pole)

  Battery Connect Line

Turn on the power switch, then you can use the remote control to start the battery bumper car. After the start, the background music will sound (the body lights will on), indicating that the whole machine is running normally.

Battery bumper car through the steering wheel to control around the turn, press the right foot switch to start the game.

  1. Site construction proposals

For the battery bumper cars, it is recommended to use cement walls above 40 centimeters or to use channel steel as fence

  1. Charging section (charging step)

(1) Turn off the main power switch of the battery bumper car before charging. Otherwise it may burn the circuit.

(2) Connect the charger output cable to the rear terminal of the battery bumper car (red is positive, black is negative), then turn on the power, and the power indicator light is on, charging begins.

(3) After the battery is fully charged, first disconnect the power cord and then disconnect the input line.

5 Mechanical system.

(1) Battery bumper cars run too slowly, it may be battery power shortage, need timely charging.

(2) Periodically grease the chain / gear with grease.

Fault diagnosis and elimination

Fault phenomenon Possible Causes Solution
Start Part The vehicle does not move when the switch is turned on Switch is broken or the switch wire is off  Replace switch or tighten switch wire
The battery is completely dead or has poor line contact Charge or reconnect
Remote control could not start The main control box is faulty or the remote control is not correct. Replace or perform remote control code
Remote battery is low Replace the remote control battery
Charging Part Charger power indicator is not lit The cable is not plugged in well. Reconnect
Charger failure Replace
The charging indicator is abnormal. Charger failure Replace
The charging indicator is normal, but it is not charged. Charger failure Replace
Poor battery contact Reconnect
Running Part Forward and backward abnormality Poor motor line contact Reconnect
Control box failure Replace
Forward and backward

foot switch is poor

Reconnect and Replace
 Foot switch failure  Repair and replace
Have forward and backward but walk very slowly The spring is too loose or the friction plate is seriously worn Tightening the spring or replacing the friction plate
Slow walking and serious motor heating

Introduction:

The battery bumper car is an improved product of traditional land bumper car. It does not need the ground net and the sky net. It can be driven on ordinary ground, such as ordinary floor tiles.It is a very popular entertainment device. Visitors drive personally, left and right, move forward and backward, greatly enhancing the interaction of tourists. The outer shell of the product is made of FRP material, and the protective layer is made of colored gel coat, which has high strength, acid and alkali resistance, and no faded. The outer ring buffer is made of bumper tires, which have a long service life and no deformation in the sun. The entire vehicle is powered by a battery.

Features:

  1. Integrated seamless FRP body, combined with unique shape design, more visual impact.
  2. Steering using steering wheel, using motor vehicle steering gear, performance is more reliable, and control is more flexible.
  3. The soft backrest design and the driving seat design make the ride more comfortable.
  4. Front and rear lamp system, the vision is more beautiful, bringing a touch of scenery to the beautiful night.

5.Using super wear-resistant polyester rubber wheel, the longest can guarantee the life of the wheel without replacement, significantly reducing the cost of use.

Technical Parameters

Power supply mode; 24V battery pack (Note: 12V batteries /2 pcs)

Motor power: 180W

Running speed; 1.5–1.9/s

Drive mode; front drive / 360 degree direction control (chain / gear)

Material; steel structure and RFP

Dimensions; 1.9*1.1*1m

Capacity: 2 people/set

Packing: bubble film packaging / can be made of steel frame (other calculation)

Charger: 24V, 10A ( It is recommended that the charging current be controlled below 10A)

Site requirements:

There is no need to fix the site, the ground level with protection can be used.

Electrical safety

  1. Regularly check the battery to see if it is leaking. If there are any problems, replace it in time.
  2. The bumper car is equipped with remote control switch for normal operation. In case of emergency, the pedal of the car body (lower right corner), the main switch of the power supply can be cut off in time.

USE Instruction

  1. Attention

(1) Operation and maintenance of this product require certain mechanical and electrical knowledge.

(2) it is strictly prohibited to use battery bumper cars in the open rain or use the water on the ground.

(3) the newly purchased battery bumper cars should be maintained within half a month. (maintenance contents: check the screws, check whether the thread is loose, and whether the oil parts are short of oil and so on).

  1. USE overview

(1) First step: equipment integrity check

Open the package to ensure that the appearance and components of the device are damaged, and the connection lines are complete.

  • Step 2: Battery installation

 Remove the equipment seat plate and put the battery in good condition. The example is 24V battery group (two series of 12V batteries are connected in series). Note that the red line is connected to the positive pole, the black line (or green line) is connected to the negative pole, and the middle positive pole and the negative pole are connected by the connecting line. Protect the battery filling hole to prevent the battery liquid burned the circuit board or other components. The battery connecting wire must be tightened to prevent the virtual connection from burning and burning the device.

Connect Red Line( Positive pole)      Connect Black Line(Negative pole)

  Battery Connect Line

Turn on the power switch, then you can use the remote control to start the battery bumper car. After the start, the background music will sound (the body lights will on), indicating that the whole machine is running normally.

Battery bumper car through the steering wheel to control around the turn, press the right foot switch to start the game.

  1. Site construction proposals

For the battery bumper cars, it is recommended to use cement walls above 40 centimeters or to use channel steel as fence.

  1. Charging section (charging step)

(1) Turn off the main power switch of the battery bumper car before charging. Otherwise it may burn the circuit.

(2) Connect the charger output cable to the rear terminal of the battery bumper car (red is positive, black is negative), then turn on the power, and the power indicator light is on, charging begins.

(3) After the battery is fully charged, first disconnect the power cord and then disconnect the input line.

5 Mechanical system.

(1) Battery bumper cars run too slowly, it may be battery power shortage, need timely charging.

(2) Periodically grease the chain / gear with grease.

Fault diagnosis and elimination

Fault phenomenon Possible Causes Solution
Start Part The vehicle does not move when the switch is turned on Switch is broken or the switch wire is off  Replace switch or tighten switch wire
The battery is completely dead or has poor line contact Charge or reconnect
Remote control could not start The main control box is faulty or the remote control is not correct. Replace or perform remote control code
Remote battery is low Replace the remote control battery
Charging Part Charger power indicator is not lit The cable is not plugged in well. Reconnect
Charger failure  

Replace

The charging indicator is abnormal. Charger failure Replace
The charging indicator is normal, but it is not charged. Charger failure Replace
Poor battery contact Reconnect
Running Part Forward and backward abnormality Poor motor line contact Reconnect
Control box failure Replace
Forward and backward

foot switch is poor

Reconnect and Replace
 Foot switch failure  Repair and replace
Have forward and backward but walk very slowly The spring is too loose or the friction plate is seriously worn Tightening the spring or replacing the friction plate
Slow walking and serious motor heating Power motor failure Replace
Serious wheel wear Ground smoothness is not enough Reforming the ground

Use and maintenance of tires

  1. The tire can be used for a long time under the condition of not more than 60 °C.
  2. Before use, check whether the inner tube has a pinhole leak, whether the part is abnormally deformed, and whether the mouth seal is good.
  3. It is forbidden to use sharp instruments for loading and unloading the tires, and first release the gas inside the tires.

4, the battery bumper car tires should be used intermittently, prohibiting exposure, so that rubber can restore fatigue, can extend the service life, continuous exposure will make the rubber early fatigue, shorten the service life.

  1. In the use of the tires, should pay attention to prevent sharp metal puncture inside
Power motor failure Replace
Serious wheel wear Ground smoothness is not enough Reforming the ground

Use and maintenance of tires

  1. The tire can be used for a long time under the condition of not more than 60 °C.
  2. Before use, check whether the inner tube has a pinhole leak, whether the part is abnormally deformed, and whether the mouth seal is good.
  3. It is forbidden to use sharp instruments for loading and unloading the tires, and first release the gas inside the tires.

4, the battery bumper car tires should be used intermittently, prohibiting exposure, so that rubber can restore fatigue, can extend the service life, continuous exposure will make the rubber early fatigue, shorten the service life.

  1. In the use of the tires, should pay attention to prevent sharp metal puncture inside
Prev:
Next: